How to change a quick release digger bucket ？

1.Safety Preparation

Park the excavator on level ground, turn off the engine, and engage the parking brake.

Lower the current digger bucket to the ground to relieve hydraulic pressure.

Wear appropriate safety gear (gloves, eye protection).

2.Relieve Hydraulic Pressure

Move hydraulic controls to release residual pressure in the system.

If the excavator bucket has hydraulic lines (e.g., for a thumb), disconnect them using couplers, capturing any fluid spillage.

3. Activate the Quick Release Mechanism

Manual Systems: Locate the Quick Release lever on the coupler. Pull or push it to retract locking pins.

Hydraulic Systems: Use the in-cab control to disengage the Quick Release coupler’s locking mechanism.

4. Remove the Old Bucket

Lift the excavator arm to detach the digger bucket from the coupler. Ensure the bucket is stable on the ground.

5. Prepare the New Bucket

Clean the mounting points on the new excavator bucket and inspect for damage.

Align the bucket’s brackets with the coupler’s hooks/pins.

6. Attach the New Bucket

Lower the Quick Release coupler onto the new excavator bucket’s brackets. Engage the mechanism to lock the pins.

7. Reconnect Hydraulics (if applicable)

Attach hydraulic lines to the new digger bucket, ensuring secure connections.

8. Inspect and Test

Confirm the Quick Release pins are fully engaged. Perform a test lift to check stability.

9. Post-Installation Checks

Grease coupler pins and consult the manual for excavator bucket maintenance tips.

10. Key Tips

Follow manufacturer guidelines for Quick Release systems.

Never force misaligned couplers when changing a digger bucket.

Contact us for more information //www.dewandaparts.com/